TECHNICS 1200 REPAIR MANUAL etc.

TECHNICS 1200 REPAIR MANUAL PDF SINGLE CLICK HERE

Technics 1200-1210 Ground Wire Hack

What you will need:
1) Wire cutters
2) Wire strippers
3) Phillips head screw driver
4) Soldering Iron
5) Solder
6) A steady hand
7) Balls

Step 1:
Remove the platter, be very careful that you place her on something soft so as not to shatter the magnet on the underside. Then turn the deck upside down (utilizing the dust cover so you don't kill the tone arm etc) and remove the feet...
CONTINUED

HOW TO REPLACE YOUR RCA CABLES

Tools

#2 Phillips Screwdriver, Precision Screwdriver set, Soldering Iron, Solder wick, Solder.
Step One:

First remove the platter, secure the tonearm, and remove the 45 plug from your turntable. Always unplug your turntable before removing the platter. Flip it over and remove the 20 sum screws from the underside and remove the foot pads. The foot pads come off by turning them counter clockwise. Once they are removed you will notice there is another screw under each one. Remove that as well. Carefully pull the rubber base from the bottom of the turntable...
CONTINUED